FEIYU MiNi 3D 3-Axis Brushless Gimbal

Tarot Supply Tarot Supply

FEIYU MiNi 3D 3-Axis Gimbal

New

Feiyu Mini 3D 3-Axis Brushless Gimbal Setup Instruction

The Feiyu MiNi 3D 3-Axis Brushless Gimbal ( For aircraft ) is specially designed for GoPro4,GoPro3+, GoPro3 and other cameras in similar sizes. 

The Feiyu MiNi 3D 3-Axis Brushless Gimbal can be easily mounted on fixed wings, multirotors, helicopters for aerial photography, and can work independently only need power supply. You can assemble the gimbal properly according to the drawing, and then install the video camera on it.

There is no need to set up and adjust the parameter. For the first use, power on the Gimbal, and then keep it static for a while, after its reset, the gimbal will be in a level position automatically. Then you can use it normally.

Please put on the camera before powering on the gimbal, or it will not work normally and may cause the gimbal damaged.

More details

Why purchase from us ?

Reliable delivery services

Friendly & fast response

We reachable 24/7 rain or shine

After sales services

Best effort - training

Credit card and instalment plan

 

Introduction

MiNi 3D 3-Axis Brushless Gimbal ( For aircraft ) suitable for GoPro4,GoPro3+,GoPro3 or cameras with similar size. Can be easily
mounted in fixed wing, multirotor, helicopter for aerial photography, and can work independently only need power supply.
You can assemble the gimbal properly according to the drawing, and then install the video camera on it.
There is no need to set up and adjust the parameter. For the first use, power on the Gimbal, and then keep it static for a while,


after its reset, the gimbal will be in a level position automatically. Then you can use it normally.

Mode Selection Instructions 

When connected to RC receiver it can switch in 3 working modes, also can control the heading and pitch via the RC receiver.

Heading Follow Mode
Camera Pitch and Roll angles remain constant, heading follows
the nose position,pitch can be control by RC .

Heading And Pitch Follow Mode
Camera Roll angle remains constant. 
Heading follow the nose position and Pitch follow the elevation of the aircraft.

Heading Lock Mode
Heading, Pitch and Roll are all locked to point at one position. 
Heading and pitch can be control by RC .

Initialize the Gimbal 
Keep the gimbal motionless, then power on, hold the gimbal steady and it will initialize automatically.
Once complete the camera will be level with the horizon in pitch and roll angles and it will be in Heading
Follow Mode.

In addition to initial power on,the Gimbal needs to be initialized whenever the following situations
appear:
1. After power on, the angle of pitch is not level with the horizon line.
2. After power on, the angle of roll is not parallel with the horizon line.
3. When the gimbal is in heading lock, the angle of heading moves frequently (heading is not stationary)


Package include :
1. gimbal body 
2. gimbal parts

Drone Shop and Services

Average drone is specialised in sales distribution, services of repair, training & aerial project using multirotor, UAV, fixed wing and industrial spec from hobby beginner to professional. The store aim to be a one-stop integrated centre in Kuala Lumpur, Malaysia.

services  and  about us