DJI Ronin - 3-Axis Gimbal System
Warning: Last items in stock!
The DJI Ronin Handheld Gimbal System has been developed for the cinematographer with pro-grade build quality keeping up with the demands of everyday use and aerial filmmaking in professional environments. Just hold it in your hands and you’ll achieve smooth and stable footage with the highest levels of precision. Even when mounted on an aircraft in high-speed flight, precise control can be achieved with the highest level of stability. Along with our attention to detail, custom built super fast processors, sensors, and algorithms offer an extreme precision of control angle within the range of ±0.02°. This puts world class leading technology into your hands offering the highest standards when it comes to picture or video stabilisation.
SmoothTrackTM gives the single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth and stabilised movements of the camera’s angle. The framing of broad wide-angle scenes or even close quarters becomes much easier during single gimbal operator use.
After balancing the camera with a simple tap of the ATS (Auto-Tune Stability) button, Ronin will be automatically tuned for your camera rig. The gimbal will intelligently adjust parameters based on the camera rigs weight and independently adjust each individual axis until an optimal setting is found.
UPRIGHT OPERATION MODE
Upright Mode allows the gimbal to be flipped over and operate the camera closer to eye level without straining to lift the gimbal. This can be used in various situations such mounting on the top of the vehicle. There are no limitations.
SUSPENDED OPERATION MODE
Standard gimbal operation is in Suspended Operation Mode. Low slung, close to the ground or simply holding the gimbal in front of you offers completely smooth and stabilised footage. This mode would also be used when mounted to a flying platform such as a multirotor.
2ND OPERATOR CONTROLLER
A 2nd operator transmitter is also included with the package. This allows for pan and tilts control as well user assignable speeds and operation modes with 2 custom toggle switches on the transmitter.
OPTIONAL JOYSTICK PAN/TILT
Single thumb control is available for the Ronin Handheld Gimbal System. Pan and Tilt movements can be controlled via the optional joystick attachment. SmoothTrackTM mode can be turned on or off via the optional joystick interface.
Accessory Power Connections
12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power
4S Ronin Battery
2.4GHz Remote Control, Bluetooth, USB
PC Assistant Software Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mobile Assistant Software Requirements
iOS version 6.1 or above Mobile Device iPhone 4s, iPhone 5, iPhone 5s, iPod touch 5, iPad 3, iPad 4, iPad mini
Mechanical & Electrical Characteristics
Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
-15°C ~ 50°C (5°F ~ 120°F)
4.20kg (9.26lbs) fully loaded with handlebar
620mm(W) x 280-380mm (D)x 500mm(H)
Supported Camera Dimensions
Maximum depth at centre of mass on camera base plate: 140mm
Maximum height measured from top of camera base plate: 225mm
Maximum width: 195mm
Load Weight (Reference Value)
Controlled Angle Accuracy
Maximum Controlled Rotation Speed
Pan axis: 90°/sec
Tilt axis: 100°/sec
Roll axis: 30° /sec
Controlled Rotation Range
Pan axis control: 360°
Tilt axis control: Up 45° to Down 120°
Roll axis control: ± 25°